[cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

[Lelio Fulgenzi]

I believe there is a minimum requirement of 4.2 or higher to use the ASA phone proxy app.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
  ----- Original Message ----- 
  From: c3voip 
  To: cisco-voip at puck.nether.net 
  Sent: Wednesday, September 10, 2008 12:26 PM
  Subject: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3


  I am attempting to setup the PhoneProxy feature in ASA 8.0.4 and am running into some issues.  I have it running for a 7962 and a 7945 phone, not sure exactly how since CCM 4.1.3 doesn't support TLS-Proxy, but nonetheless it is working for them.

   

  My problem is with the 7940's and IPC.  The 7940's look like they are working from the phone, but they do not show up as secure-phones on the ASA.  IPC's do not even register in secure-mode on the phone itself, but does show up as a secure-phone on the ASA, but with a port of 0 instead of an ethereal port.  Signaling works for these 2 but RTP traffic never passes. 

   

  Are there any CCM 4.1 specific guides for using the PhoneProxy feature in ASA 8.0.4?

   

  Thanks,

  -C

   

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080910/fdc1dfd8/attachment.html>