[cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

[c3voip]

So does IPC require an LSC as well?

 

-C

 

From: Matt Slaga (US) [mailto:Matt.Slaga at us.didata.com] 
Sent: Thursday, September 11, 2008 9:43 AM
To: c3voip; Lelio Fulgenzi; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

Your issue with the 7940/60s and IPC takes additional configuration on each
endpoint device.

 

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/unifi
ed_comm.html#wp1217057

 

and

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/7_0_1/secugd/sec
ucapf.html#wp1093518

 

TLS/SRTP is only enabled on the outside, internally you are still TCP/RTP.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of c3voip
Sent: Wednesday, September 10, 2008 3:43 PM
To: 'Lelio Fulgenzi'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

Any idea as to what 4.2 supports to make this the requirement?

 

-C

 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, September 10, 2008 2:00 PM
To: c3voip; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

I believe there is a minimum requirement of 4.2 or higher to use the ASA
phone proxy app.

 

Lelio
----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7'
crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.

----- Original Message ----- 

From: c3voip <mailto:c3voip at nc.rr.com>  

To: cisco-voip at puck.nether.net 

Sent: Wednesday, September 10, 2008 12:26 PM

Subject: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

I am attempting to setup the PhoneProxy feature in ASA 8.0.4 and am running
into some issues.  I have it running for a 7962 and a 7945 phone, not sure
exactly how since CCM 4.1.3 doesn't support TLS-Proxy, but nonetheless it is
working for them.

 

My problem is with the 7940's and IPC.  The 7940's look like they are
working from the phone, but they do not show up as secure-phones on the ASA.
IPC's do not even register in secure-mode on the phone itself, but does show
up as a secure-phone on the ASA, but with a port of 0 instead of an ethereal
port.  Signaling works for these 2 but RTP traffic never passes. 

 

Are there any CCM 4.1 specific guides for using the PhoneProxy feature in
ASA 8.0.4?

 

Thanks,

-C

 

 


  _____  


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080911/f4a7bada/attachment.html>