[cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

[Matt Slaga (US)]

Your issue with the 7940/60s and IPC takes additional configuration on
each endpoint device.

 

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/u
nified_comm.html#wp1217057

 

and

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/7_0_1/secugd
/secucapf.html#wp1093518

 

TLS/SRTP is only enabled on the outside, internally you are still
TCP/RTP.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of c3voip
Sent: Wednesday, September 10, 2008 3:43 PM
To: 'Lelio Fulgenzi'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

Any idea as to what 4.2 supports to make this the requirement?

 

-C

 

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Wednesday, September 10, 2008 2:00 PM
To: c3voip; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

 

I believe there is a minimum requirement of 4.2 or higher to use the ASA
phone proxy app.

 

Lelio
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this
7' crossover cable
is not regulation issue for most competitive Manhattan double dutch
leagues.

	----- Original Message ----- 

	From: c3voip <mailto:c3voip at nc.rr.com>  

	To: cisco-voip at puck.nether.net 

	Sent: Wednesday, September 10, 2008 12:26 PM

	Subject: [cisco-voip] ASA 8.0.4 PhoneProxy with CCM 4.1.3

	 

	I am attempting to setup the PhoneProxy feature in ASA 8.0.4 and
am running into some issues.  I have it running for a 7962 and a 7945
phone, not sure exactly how since CCM 4.1.3 doesn't support TLS-Proxy,
but nonetheless it is working for them.

	 

	My problem is with the 7940's and IPC.  The 7940's look like
they are working from the phone, but they do not show up as
secure-phones on the ASA.  IPC's do not even register in secure-mode on
the phone itself, but does show up as a secure-phone on the ASA, but
with a port of 0 instead of an ethereal port.  Signaling works for these
2 but RTP traffic never passes. 

	 

	Are there any CCM 4.1 specific guides for using the PhoneProxy
feature in ASA 8.0.4?

	 

	Thanks,

	-C

	 

	 

	
________________________________


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080911/6de7ea92/attachment-0001.html>