[cisco-voip] download BARS for UCCx?

[Jason Aarons (US)]

I recall it uses the same BARS as CallManager 4x for Windows.  Current
version is 4.0(14).  Once it talks to Target it will add check box for
UCCX.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/bars/rel_notes/rn40_1
4.html

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_cente
r/crs/express_compatibility/matrix/crscomtx.pdf

Please see the Unified CM compatibility matrix for the recommended BARS
version.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.ht
ml

 

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Thursday, September 11, 2008 1:00 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] download BARS for UCCx?

 

I'm trying to find the BARS for UCCx 5.0.2   any idea where to download
it.  I can't find it.  or am I supposed to use the CM 4.3 version?

 

tia

 

Scott




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080911/2ab74005/attachment.html>