[cisco-voip] CUPC 1.2(3) Reachability Status Issue

[Matt Slaga (US)]

Is this all devices or just one?

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rick Mancinelli
Sent: Thursday, September 11, 2008 4:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUPC 1.2(3) Reachability Status Issue

 

Having a strange issue with Reachability Status on CUPC 1.2(3) with CUPS
6.0.2.1000-27.....

 

Issue is that when a user is on the phone, that user's status still
shows "Available" in CUPC for the other users.  If that user manually
sets their status to Away, then it shows up just fine.  The Idle status
is also showing just fine.  I configured some BLF/SD buttons to make
sure the phone presence information was being shared correctly within
CM, and it is.   It just seems not to be reaching CUPS / CUPC.

 

Ideas?

 

TIA-

Rick




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080911/215ed695/attachment.html>