[cisco-voip] Unnassigned DNs in CM 4 ?

[Mike Lydick]

If you are wanting to route unassigned DN or ranges I would look at CTI
Route points and call forward all the matching DN to an attendant option.

On Sat, Sep 20, 2008 at 3:09 PM, Mike Brooks <2xccie2b at gmail.com> wrote:

> Thanks for the info Aman.
>
> To me this option in CM5 and CM6 makes it easier for larger
> enterprises to perform move/adds/changes.  Its easier to track with
> the unassigned numbers already defined.  Plus you can bulk in
> unassigned numbers with out associating them to devices.
>
> Thanks again,
>
> Mike Brooks
> CCIE# 16027 (R&S)
>
> On Sat, Sep 20, 2008 at 1:42 PM, Aman Chugh <aman.chugh at gmail.com> wrote:
> > If you delete the phone on which the number was assigned , you can still
> > find that DN in route plan report in 4.x
> >
> >
> > Aman
> >
> > On Sat, Sep 20, 2008 at 9:26 AM, Mike Brooks <2xccie2b at gmail.com> wrote:
> >>
> >> In CM 4 is there a way to create unassigned DNs ?
> >>
> >> In CM 5 and 6 you can create them without associating them with a
> device.
> >>
> >> thx,
> >> Mike Brooks
> >> CCIE# 16027(R&S)
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



-- 
Best Regards,

Mike Lydick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080920/ddbce4a0/attachment.html>