[cisco-voip] mgcp tcp/udp port question

[Wes Sisk]

ccm-manager depends on TFTP.
you will use RTP.

unless using security features you will not be using esp/ike/sRTP

/wes

On 9/24/2008 3:19 PM, Joe Cisco wrote:
> ccm-manager config yes.
>
> -Joe C.
>
> On Wed, Sep 24, 2008 at 1:52 PM, Wes Sisk <wsisk at cisco.com> wrote:
>   
>> are you using 'ccm-manager config'?
>> are you using encrypted signaling or sRTP?
>> are you using RTP?
>>
>> On 9/24/2008 12:15 PM, Joe Cisco wrote:
>>     
>>> This is for a CM 4.2 site, and per here:
>>>
>>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/4_2/42plrev2.pdf
>>>
>>> I see ports 2427 UDP and 2428 TCP listed for an MGCP gateway. Do I
>>> also need to QoS the ESP, IKE, TFTP, RTP, and SRTP ports as well when
>>> utilizing MGCP? Am i missing anything else?
>>>
>>> Thanks,
>>>
>>> Joe C.
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>