[cisco-voip] mgcp tcp/udp port question

[Joe Cisco]

ccm-manager config yes.

-Joe C.

On Wed, Sep 24, 2008 at 1:52 PM, Wes Sisk <wsisk at cisco.com> wrote:
> are you using 'ccm-manager config'?
> are you using encrypted signaling or sRTP?
> are you using RTP?
>
> On 9/24/2008 12:15 PM, Joe Cisco wrote:
>>
>> This is for a CM 4.2 site, and per here:
>>
>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/4_2/42plrev2.pdf
>>
>> I see ports 2427 UDP and 2428 TCP listed for an MGCP gateway. Do I
>> also need to QoS the ESP, IKE, TFTP, RTP, and SRTP ports as well when
>> utilizing MGCP? Am i missing anything else?
>>
>> Thanks,
>>
>> Joe C.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>