[cisco-voip] mgcp tcp/udp port question

[Wes Sisk]

are you using 'ccm-manager config'?
are you using encrypted signaling or sRTP?
are you using RTP?

On 9/24/2008 12:15 PM, Joe Cisco wrote:
> This is for a CM 4.2 site, and per here:
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/port/4_2/42plrev2.pdf
>
> I see ports 2427 UDP and 2428 TCP listed for an MGCP gateway. Do I
> also need to QoS the ESP, IKE, TFTP, RTP, and SRTP ports as well when
> utilizing MGCP? Am i missing anything else?
>
> Thanks,
>
> Joe C.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>