[cisco-voip] VTA one way video

[Jason Burns]

Neither side gets remote video?

Do both sides get audio?

You might want to check to see if something is blocking the video stream
leaving the PC.

Look at the SCCP StartMultiMediaTransmission sent to each individual phone.
The phone passes this IP and port back to the PC using the CAST protocol.
>From this point the PC then sends a video stream to the other PC.


On Sat, Sep 27, 2008 at 8:30 AM, Voice Noob <voicenoob at gmail.com> wrote:

> I am using the newest VTA software. I can do video checks fine within the
> software but when I setup a call between two video enabled 7975 phones I
> only get local video on both sides of the call. Has anyone seen this or have
> any suggestions?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080928/712a8457/attachment.html>