[cisco-voip] VTA one way video

[Voice Noob]

Yes neither side gets remote video. Nothing that I know if should be
blocking it. Where are these log files at or do I need to use a packet
sniffer?

On Sun, Sep 28, 2008 at 7:21 PM, Jason Burns <burns.jason at gmail.com> wrote:

> Neither side gets remote video?
>
> Do both sides get audio?
>
> You might want to check to see if something is blocking the video stream
> leaving the PC.
>
> Look at the SCCP StartMultiMediaTransmission sent to each individual phone.
> The phone passes this IP and port back to the PC using the CAST protocol.
> From this point the PC then sends a video stream to the other PC.
>
>
>  On Sat, Sep 27, 2008 at 8:30 AM, Voice Noob <voicenoob at gmail.com> wrote:
>
>>  I am using the newest VTA software. I can do video checks fine within
>> the software but when I setup a call between two video enabled 7975 phones I
>> only get local video on both sides of the call. Has anyone seen this or have
>> any suggestions?
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080929/782d14f6/attachment.html>