[cisco-voip] VTA one way video

[Scott Voll]

have you checked to make sure your location / region is allowing Video?

Scott

On Mon, Sep 29, 2008 at 2:03 PM, Voice Noob <voicenoob at gmail.com> wrote:

> Yes neither side gets remote video. Nothing that I know if should be
> blocking it. Where are these log files at or do I need to use a packet
> sniffer?
>
> On Sun, Sep 28, 2008 at 7:21 PM, Jason Burns <burns.jason at gmail.com>wrote:
>
>> Neither side gets remote video?
>>
>> Do both sides get audio?
>>
>> You might want to check to see if something is blocking the video stream
>> leaving the PC.
>>
>> Look at the SCCP StartMultiMediaTransmission sent to each individual
>> phone. The phone passes this IP and port back to the PC using the CAST
>> protocol. From this point the PC then sends a video stream to the other PC.
>>
>>
>>  On Sat, Sep 27, 2008 at 8:30 AM, Voice Noob <voicenoob at gmail.com> wrote:
>>
>>>  I am using the newest VTA software. I can do video checks fine within
>>> the software but when I setup a call between two video enabled 7975 phones I
>>> only get local video on both sides of the call. Has anyone seen this or have
>>> any suggestions?
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080929/c6cdcad5/attachment.html>