[cisco-voip] VG224 problems

[Truelove_John]

I have 6 VG224 installed and I am getting mixed results with reliability
of service on the ports.

I have many ports that work fine for days and then stop working.

 

When they stop working there is no dial tone at the ports, it seems like
the lines get noisy thus

causing the ports on the VG224 to FXSLS_CONNECT for an extended period
of time, timing out, then no dial tone.

 

On some ports, I can remove the station side and the ports start working
again until I connect the station side back again.

I can then move them to a different VG224 with open ports and they will
start working again.

 

On other ports, it didn't matter that I removed the station side, I
still could not get dial tone and it

appeared as if the ports were dead on the VG224, rebooting didn't help.

 

Right now I am working with 7 ports that previously worked all last week
(1 modem, 5 fax, 1 pots).

 

Has anyone else had problems like this with the VG224s ? 

What can I use to test the lines to ensure they are up to specifications
for the VG224s ?

 

Any help or suggestion would be greatly appreciated, I am tried on
playing musical POTS lines on the VG224s.

 

Thanks

John

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080929/17b2f19b/attachment.html>