[cisco-voip] CAD and CSD Install

Thu Apr 2 13:27:49 EDT 2009

The IP address setting is stored under
HKEY_LOCAL_MACHINE\SOFTWARE\Spanlink\CAD\Site Setup and the LDAP Host X
keys.  As part of your script a simple reg add would get that
information in the registry.  The sometimes-tricky part is getting the
MONITOR DEVICE set up correctly so that Supervisor monitoring and
recording work correctly.

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Thursday, April 02, 2009 10:53
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CAD and CSD Install

Is it possible to configure CAD and CSD for an automatic install without
having to manually enter the IP address for the CRS server or choose
Supervisor vs. Agent in the configuration.  I have a load of new PCs and
my windows group is trying to figure out if we can do this automatically
with some scripting tools they use for other software installs or if
they all have to be done manually one at a time.

Thanks.

Micah Bennett

Telecommunications Admin

Active Outdoors

####################################################################################################
This email is confidential and may be legally privileged. It is intended solely for the addressee.
Access to this email by anyone else, unless expressly approved by the sender or an authorized
addressee, is unauthorized. If you are not the intended recipient, any disclosure, copying,
distribution or any action omitted or taken in reliance on it, is prohibited and may be unlawful.
If you believe that you have received this email in error, please contact the sender, delete this
email, and destroy all copies.
####################################################################################################
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090402/8ad00a42/attachment.html>