[cisco-voip] RCA to RJ-45

[Voice Noob]

I have a customer that wants to stream from satellite radio feed. They say
they have purchased the service to do this. Their old system used an small
RCA type connection. I suppose I need an E&M card to do this but is there an
adaptor or some pin out diagram to convert the RCA connection to an RJ-45
for the E&M card? 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090407/68930161/attachment.html>