[cisco-voip] Broadcast Message

[Jason Aarons (US)]

In Unity you could send a Broadcast Message to all subscribers, their
red light would turn on, etc.

 

Check out IPSession from IPcelerate

 

http://www.ipcelerate.com/ipsession.html

 

I suspect you should upgrade to a 4th generation phone and maybe look
into Cisco Unified Presence Server. I suspect the 79x0 will be a
limiting factor.

 

The Cisco IP Phone Messenger service (IPPM), included with Cisco Unified
Presence, provides an Instant Messaging (IM) client on Cisco Unified IP
Phones with presence-enabled contacts lists.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cruz, David
[HDS]
Sent: Wednesday, April 08, 2009 1:19 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Broadcast Message

 

An end user posted the following question: 

 

We are curious if our phones Cisco Model 7960 IP phones are capable of
sending a broadcast message to all phones currently located in a
particular site
in case of emergency?

 

Any ideas? 

 

Thank you in advance 

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090408/0091cee2/attachment.html>