[cisco-voip] Send out LD code on a PRI

[Voice Noob]

I will give it a try. 

-----Original Message-----
From: matthn at gmail.com [mailto:matthn at gmail.com] On Behalf Of Nick Matthews
Sent: Saturday, April 11, 2009 12:28 PM
To: Voice Noob
Cc: Jason Aarons (US); Ryan Ratliff; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Send out LD code on a PRI

You may want to see if this pots dial peer command helps at all:

forward-digits extra inband

You could still dial 10 digits, but then have an incoming dial peer
append your long distance code.  You pots dial peer would still match
the 10 digits, and in theory, put the other digits in-band.


-nick

On Fri, Apr 10, 2009 at 1:31 PM, Voice Noob <voicenoob at gmail.com> wrote:
> I would look at the TCL option on the gateway because that would always be
> up but I don't want to use UCCX because it will not be available all the
> time. I don't know how to do TCL scripting but if there was a good example
> of one where it waited and sent digits I could probably change it to do
what
> I wanted. Anyone have a sample TCL script?
>
> -----Original Message-----
> From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com]
> Sent: Friday, April 10, 2009 11:14 AM
> To: Voice Noob; Ryan Ratliff
> Cc: cisco-voip at puck.nether.net
> Subject: RE: [cisco-voip] Send out LD code on a PRI
>
> Since the call is "completed", then you get DTMF I don't see a way to do
> accomplish your goal without some TCL or other IVR/UCCX type solution
> for outbound dialing.
>
> I would be interested long term what solution you attempt and how it
> works out. I see this with customers about once a year..
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
> Sent: Friday, April 10, 2009 12:00 PM
> To: 'Ryan Ratliff'
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Send out LD code on a PRI
>
> I get a second dial tone after my call has been setup from my gateway so
> they need to see them as DTMF after the call is completed.
>
> -----Original Message-----
> From: Ryan Ratliff [mailto:rratliff at cisco.com]
> Sent: Friday, April 10, 2009 10:38 AM
> To: Voice Noob
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Send out LD code on a PRI
>
> Do you just need to prefix those 3 digits on every outbound call or
> is the provider expecting them as dtmf after the initial call setup?
>
> If they just want to see those 3 digits at the beginning of the
> called party number the prefix command on the pots dial-peer or in
> CUCM should take care of it.
>
> -Ryan
>
> On Apr 10, 2009, at 10:34 AM, Voice Noob wrote:
>
> I have seen this question posted but with no solution so I am going
> to ask again to see if anyone has a suggestion. I have CUCM 7.0 with
> an H.323 gateway and a PRI. The Telco is looking for a 3 digit code
> for all long distance calls that is then reported on to someone
> internally. I know I can do this in Call Manager but the powers that
> be will not change the requirement for the Telco side even though no
> one has looked at the reports in months. J So I want to add this code
> for all outgoing calls because I am too lazy to reach over to my
> phone and put the 3 digit code in especially when I use Click-to-Call
> or CUPC. I know I can make something in UCCX to do this but my UCCX
> box is only for testing and development and may not be up 100% of the
> time. I would be open to using a TCL script or even Unity Connection
> if someone has an example on how  to do this. I have tried using the
> prefix command but that is not working as expected. Does anyone have
> a solution to adding a 3 digit LD code to an outbound call on a PRI?
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only.  If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful.  If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>