[cisco-voip] Configuring 6608 ports as Transcoder in UCM 7.0

[Matt Slaga (US)]

You will need this firmware for the 6608:

 

cmterm-6608mtp-4.0.0.06-sccp.cop.sgn 

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.ht
ml

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nasses, Gus
Sent: Monday, April 13, 2009 12:31 PM
To: Scott Voll
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Configuring 6608 ports as Transcoder in UCM
7.0

 

Nope, new install of 7 on new hardware. 6608 blade already has one port
registered to old 4.3 CM, and I can register the spare port as a second
transcoder resource on the old 4.3. 

 

I am adding it as transcoder type "Cisco Media Termination Point
Hardware". Only other options are the IOS Media Termination Point, IOS
Enhanced Media Termination Point, or Cisco Media Termination Point
(WS-SVC-CMM).   

________________________________

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Monday, April 13, 2009 11:17 AM
To: Nasses, Gus
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Configuring 6608 ports as Transcoder in UCM
7.0

 

Is this an upgrade from CM 4 to 7?

 

if so, look at what kind of transcoding resource it is.  I'm guessing
you don't what to use the Enhanced and most likely not even the normal
IOS type.  delete it and try to recreate it and see if that works.

 

Scott

On Mon, Apr 13, 2009 at 8:39 AM, Nasses, Gus <gnasses at tcfbank.com>
wrote:

Cannot get the 6608 port to register as a transcoder resource to my Call
Manager Version 7.0.2.10000-18. 

 

I can get an IOS router to register as a Transcoder, and I can get my
6608 port to register as a transcoder on my CM version 4.3. Is there a
trick or is this somehow not supported? 

 

Thanks, 

 

Gus Nasses


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090413/d20f4577/attachment.html>