[cisco-voip] Configuring 6608 ports as Transcoder in UCM 7.0

[Nasses, Gus]

Nope, new install of 7 on new hardware. 6608 blade already has one port
registered to old 4.3 CM, and I can register the spare port as a second
transcoder resource on the old 4.3. 

 

I am adding it as transcoder type "Cisco Media Termination Point Hardware".
Only other options are the IOS Media Termination Point, IOS Enhanced Media
Termination Point, or Cisco Media Termination Point (WS-SVC-CMM).   

________________________________

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Monday, April 13, 2009 11:17 AM
To: Nasses, Gus
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Configuring 6608 ports as Transcoder in UCM 7.0

 

Is this an upgrade from CM 4 to 7?

 

if so, look at what kind of transcoding resource it is.  I'm guessing you
don't what to use the Enhanced and most likely not even the normal IOS type.
delete it and try to recreate it and see if that works.

 

Scott

On Mon, Apr 13, 2009 at 8:39 AM, Nasses, Gus <gnasses at tcfbank.com> wrote:

Cannot get the 6608 port to register as a transcoder resource to my Call
Manager Version 7.0.2.10000-18. 

 

I can get an IOS router to register as a Transcoder, and I can get my 6608
port to register as a transcoder on my CM version 4.3. Is there a trick or is
this somehow not supported? 

 

Thanks, 

 

Gus Nasses


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090413/b7f3e30c/attachment.html>