[cisco-voip] Append LD Access code on outbound call

[Voice Noob]

Can someone point me to some example TCL scripts or a forum to ask TCL
question? I need to this using TCL on the gateway. Thanks. 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Friday, July 11, 2008 8:51 AM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Append LD Access code on outbound call

 

not likely to be possible.  most access codes require inband dtmf.  note
this is distinctly separate from the digits send on the isdn d-ch to
establish the call.

only likely way would be a custom IPCCX/IVR, TCL, or CUEA script that:
1. sends the inital setup with called party number
2. waits a period of time, or even better, does tone detection to determine
when the telco prompts for access code
3. sends the access code as inband DTMF
4. connects the calling/called party numbers

Customers i've worked with in the past were not interested in this much work
for a single special user.  they usually dedicated 1 pots line to allow that
person outbound calling.  remove the LD codes from the pots line and
configure CSS so only the special user can use that pots line.

/Wes

Carter, Bill wrote: 

Telco requires a 3-digit access code for long distance calls. Customer would
like to NOT have to dial a code when faxing to a LD number. Is this
possible??

 

Background:

PSTN connection is PRI

Telco says LD code required for all outbound calls. (can't disable based on
calling party #)

GW is H323

 

 

 

Gateway Attempts:

On the gateway I tried a standard dial peer with  "translate-outgoing
called". I tried post-pending a ,022 to the string (, is supposed to insert
a pause and 022 is the telco access code).

 

voice translation-rule 10

 rule 1 /^\#\(1[2-9]..[2-9]......\)/ /\1\2,022/

 

test voice translation-rule 10 #14085551212

Matched with rule 1

Original number: #14085551212   Translated number: 14085551212,022

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

 

dial-peer voice 300 pots

 description -- POTS Dial peer to route calls out PRI --

 destination-pattern #1[2-9]..[2-9]......

 translate-outgoing called 10

 incoming called-number .

 direct-inward-dial

 port 0/1/0:23

 prefix 1

 

I tried "forward-digits extra" which is supposed to send any digits longer
than the length of the destination-pattern. Didn't work.

 

CallManager Attempts:

I also tried the CallManager translation-pattern route:

 

Translation Pattern

91[2-9]XX[2-9]XXXXXX

Calling Party Transformation Mask

XXXXXXXXXXXX022

DNA analysis gives the following

Dialed number 914085551212

Result ???714085551022

 

 

 

 

Bill Carter

Sr Business Communications Analyst

Sentinel Technologies, Inc

217.391.5015

 

 



  _____  



 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090417/d39a04ad/attachment.html>