[cisco-voip] X-Lite on CUCM using 3rd Party SIP

[Bill Simon]

When using a 3rd-party SIP device and sending credentials, these 
credentials are sent unencrypted, right?  They are hashed with MD5 and 
that's it?


Samuel Womack wrote:
> Try these Settings on your X-Lite and Get back with me...I don't have 
> anything to use right now...so I'm taking an educated guess on these...
> 
> for the Username = DN (Directory Number)
> Password = LDAP (Digest User) Password
> Authorization Username is the USER ID
> DOMAIN = ip Address of CallManager Server
> 
> Everything else should be good
> 
> For CCM
> BASIC SIP THRID PARTY DEVICE...
> 
> Digest User is the Auth User configured into the Phone
> Associate this Device to the User (End User Device Association)
> 
> Under the DN you might want to Associate the User (configured at the 
> very bottom of the page)
> 
> Get back with me...
> 
> 
> On Apr 8, 2009, at 4:25 PM, Matthew J. Hughes wrote:
> 
>> I am having trouble setting up a Third Party SIP SoftPhone on CUCM 
>> 6.1.  I have found a guide that gives details on setting it up, 
>> however I run into problems because our users are synced via 
>> ActiveDirectory so i do not have the ability to add users directly 
>> inside of CUCM.   Can someone give me thier experiece with SIP 
>> Softphones and CUCM?