[cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)

[Paul]

Who told you?!?!


...yes, a UCCE upgrade from 5 to 7.2.




________________________________
From: Matt Slaga (US) <Matt.Slaga at us.didata.com>
To: Lelio Fulgenzi <lelio at uoguelph.ca>; Paul <asobihoudai at yahoo.com>
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, April 28, 2009 1:56:34 PM
Subject: RE: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)


Just out of curiosity, what is holding you back at 3.3?  UCCE
upgrade?
 
From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On
Behalf Of Lelio Fulgenzi
Sent: Tuesday, April 28, 2009 1:35 PM
To: Paul
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)
 
I would check the compatibility chart that is available on the
Cisco website. Under the 3.3 column it will have the load that is supported
and/or a Y/N. That is the official answer. 

Of course, that doesn't mean there are not any bugs. ;)


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt


----- Original Message -----
From: "Paul" <asobihoudai at yahoo.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, April 28, 2009 1:31:26 PM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)


Where can I find information for a definitive answer on compatibility of a
WS-SVC-CMM with CCM 3.3(3)? My CCIE Voice ninja tells me the CMM blade doesn't
play nice with CCM 3.3(3) yet I have a customer that *appears* to be using the
CMM blade right now.

Cheers,
Paul


      

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.  If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.