[cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)

[Peter Slow]

It isnt going to "play nicely" but it SHOULD register and can be used
- you should be able to get it registered as a (non-enhanced) IOS CFB
or transcoding resource. you'll need to leave off the version number
when you configure the CCM ip addresses in IOS - it should default to
3-dot-something and will use the old SCCP device types to register.

-Peter

On Tue, Apr 28, 2009 at 2:13 PM, Paul <asobihoudai at yahoo.com> wrote:
>
> Who told you?!?!
>
>
> ...yes, a UCCE upgrade from 5 to 7.2.
>
>
>
>
> ________________________________
> From: Matt Slaga (US) <Matt.Slaga at us.didata.com>
> To: Lelio Fulgenzi <lelio at uoguelph.ca>; Paul <asobihoudai at yahoo.com>
> Cc: cisco-voip at puck.nether.net
> Sent: Tuesday, April 28, 2009 1:56:34 PM
> Subject: RE: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)
>
>
> Just out of curiosity, what is holding you back at 3.3?  UCCE
> upgrade?
>
> From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On
> Behalf Of Lelio Fulgenzi
> Sent: Tuesday, April 28, 2009 1:35 PM
> To: Paul
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)
>
> I would check the compatibility chart that is available on the
> Cisco website. Under the 3.3 column it will have the load that is supported
> and/or a Y/N. That is the official answer.
>
> Of course, that doesn't mean there are not any bugs. ;)
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Paul" <asobihoudai at yahoo.com>
> To: cisco-voip at puck.nether.net
> Sent: Tuesday, April 28, 2009 1:31:26 PM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] WS-SVC-CMM compatibility + CCM 3.3(3)
>
>
> Where can I find information for a definitive answer on compatibility of a
> WS-SVC-CMM with CCM 3.3(3)? My CCIE Voice ninja tells me the CMM blade doesn't
> play nice with CCM 3.3(3) yet I have a customer that *appears* to be using the
> CMM blade right now.
>
> Cheers,
> Paul
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> ________________________________
>
> Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only.  If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful.  If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>