[cisco-voip] Hunt Pilot fast busy

[Wes Sisk]

AFter you build out out this config you definitely ahve to reset the 
pilot point, hunt list and line group.  anywhere there is a reset click it.

On Tuesday, April 28, 2009 6:10:56 PM, Micah Bennett 
<mbennett at als-xtn.com> wrote:
>
> Ok.  I built my Line group just like my Unity ports and assigned my 
> group of VG ports
>
>  
>
> I built the Hunt list just like my Unity HL.
>
>  
>
> I built the Hunt Pilot just like my Unity HP.
>
>  
>
> Still fast busy on the Hunt Pilot.
>
>  
>
> I went back and deleted the VG ports and added an IP phone for test 
> and the HP still gets fast busy.
>
>  
>
> Am I missing something?
>
>  
>
> *Micah Bennett*
> Telecommunications Admin
> *Active Outdoors*
>
> ------------------------------------------------------------------------
>
> *From:* cisco-voip-bounces at puck.nether.net 
> [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf Of *Micah Bennett
> *Sent:* Tuesday, April 28, 2009 4:50 PM
> *To:* Wes Sisk
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Hunt Pilot fast busy
>
>  
>
> Thanks.
>
>  
>
> I took a breath and looked back at everything.  I got it working with 
> IP phone extensions, but it still goes fast busy with Analog VG ports.
>
>  
>
> I am going to go the Hunt List route like the Unity ports and see how 
> that works. Thanks.
>
>  
>
> *Micah Bennett*
> Telecommunications Admin
> *Active Outdoors*
>
> ------------------------------------------------------------------------
>
> *From:* Wes Sisk [mailto:wsisk at cisco.com]
> *Sent:* Tuesday, April 28, 2009 4:47 PM
> *To:* Micah Bennett
> *Cc:* Bill Talley; cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Hunt Pilot fast busy
>
>  
>
> with AC config corrected then restart the AC service. since these are 
> analog ports there may be interesting issues with monitoring line 
> state via CTI.
>
> your best bet is to go with the more native hunt pilot/hunt 
> list/linegroup configuration.  this is all built into ccm.exe natively 
> and does not depend on any CTI integration.
>
> /wes
>
> On Tuesday, April 28, 2009 4:38:32 PM, Micah Bennett 
> <mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com> wrote:
>
> I found that finally, and it did not seem to help.  When I associated 
> it, it went from a fast busy to acting like it was stuck.  Don't 
> remember the details. 
>
>  
>
> I may try the hunt list setup like I have for my Unity and see how 
> that works. 
>
>  
>
> I just need a single incoming number to roll to 8 analog lines on my 
> VG224 that will be connected to a server for some download tasks.  It 
> worked a while back in my test but not now.
>
>  
>
> Thanks.
>
>  
>
> *Micah Bennett*
> Telecommunications Admin
> *Active Outdoors*
>
> *From:* Wes Sisk [mailto:wsisk at cisco.com]
> *Sent:* Tuesday, April 28, 2009 3:01 PM
> *To:* Micah Bennett
> *Cc:* Bill Talley; cisco-voip at puck.nether.net 
> <mailto:cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Hunt Pilot fast busy
>
>  
>
> AC?  did you associate to the AC user?  Is the AC user CTI enabled?  
> Do you have other functional AC Pilot Points?
>
> /Wes
>
> On Tuesday, April 28, 2009 3:24:55 PM, Micah Bennett 
> <mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com> wrote:
>
> Check that.  All is good.
>
>  
>
> *Micah Bennett*
>
>
> *From:* Bill Talley [mailto:btalley at gmail.com]
> *Sent:* Tuesday, April 28, 2009 2:19 PM
> *To:* Micah Bennett; cisco-voip at puck.nether.net 
> <mailto:cisco-voip at puck.nether.net>
> *Subject:* RE: [cisco-voip] Hunt Pilot fast busy
>
>  
>
> I ran into this before and 'logged into hunt group' was unchecked on 
> the vg ports. After checking it, calls work as expecte
>
> ------------------------------------------------------------------------
>
> *From: *Micah Bennett <mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>
> *Sent: *Tuesday, April 28, 2009 1:45 PM
> *To: *cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> *Subject: *[cisco-voip] Hunt Pilot fast busy
>
> Hello
>
> I am trying to create a simple hunt group to some ports on my vg224.
>
> I tested this before with regular IP phones and it worked fine. 
>
> I copied an existing, working Hunt Pilot and assigned members to the 
> group as usual.
>
> The new one rings fast busy.  I can't figure out what I am missing, or 
> if something is broken. 
>
> Any help is appreciated.
>
> *Micah Bennett*
>
>
>
> [The entire original message is not included]
>
>  
>  
>  
>  
>  
>
>
> ------------------------------------------------------------------------
>
>
>  
>  
>  
>  
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>   
>
>  
>
>  
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090428/59583c93/attachment.html>