[cisco-voip] Hunt Pilot fast busy

[Paul]

What troubleshooting steps have you taken thus far? Are you using MGCP or Skinny?




________________________________
From: Micah Bennett <mbennett at als-xtn.com>
To: Micah Bennett <mbennett at als-xtn.com>; Wes Sisk <wsisk at cisco.com>
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, April 28, 2009 6:10:56 PM
Subject: Re: [cisco-voip] Hunt Pilot fast busy


Ok.  I built my Line group just like my
Unity ports and assigned my group of VG ports
 
I built the Hunt list just like my Unity
HL.
 
I built the Hunt Pilot just like my Unity
HP.
 
Still fast busy on the Hunt Pilot.
 
I went back and deleted the VG ports and
added an IP phone for test and the HP still gets fast busy. 
 
Am I missing something?
 
Micah Bennett 
Telecommunications Admin 
Active Outdoors 



________________________________

From:cisco-voip-bounces at puck..nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Tuesday, April 28, 2009 4:50
PM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt
Pilot fast busy
 
Thanks.
 
I took a breath and looked back at
everything.  I got it working with IP phone extensions, but it still goes
fast busy with Analog VG ports.
 
I am going to go the Hunt List route like
the Unity ports and see how that works. Thanks.
 
Micah
Bennett 
Telecommunications Admin 
Active Outdoors 

________________________________

From:Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 4:47
PM
To: Micah Bennett
Cc: Bill Talley;
cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt
Pilot fast busy
 
with AC config corrected
then restart the AC service. since these are analog ports there may be
interesting issues with monitoring line state via CTI.

your best bet is to go with the more native hunt pilot/hunt list/linegroup
configuration.  this is all built into ccm.exe natively and does not
depend on any CTI integration.

/wes

On Tuesday, April 28, 2009 4:38:32 PM, Micah Bennett <mbennett at als-xtn.com> wrote:
I found that finally, and it did not seem to help.  When
I associated it, it went from a fast busy to acting like it was stuck. 
Don’t remember the details.  
 
I may try the hunt list setup like I have
for my Unity and see how that works.  
 
I just need a single incoming number to
roll to 8 analog lines on my VG224 that will be connected to a server for some
download tasks.  It worked a while back in my test but not now.
 
Thanks.
 
Micah Bennett 
Telecommunications Admin 
Active Outdoors 


From:Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 3:01
PM
To: Micah Bennett
Cc: Bill Talley; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt
Pilot fast busy
 
AC?  did you
associate to the AC user?  Is the AC user CTI enabled?  Do you have
other functional AC Pilot Points?

/Wes

On Tuesday, April 28, 2009 3:24:55 PM, Micah Bennett <mbennett at als-xtn.com> wrote:


Check that.  All is good.
 
Micah Bennett



From:Bill
Talley [mailto:btalley at gmail.com] 
Sent: Tuesday, April 28, 2009 2:19
PM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Hunt
Pilot fast busy
 
I ran into this
before and 'logged into hunt group' was unchecked on the vg ports. After
checking it, calls work as expecte

________________________________

From: Micah Bennett <mbennett at als-xtn.com>
Sent: Tuesday, April 28, 2009 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt Pilot fast busy
Hello
I am trying to create a simple hunt group to some ports on
my vg224.
I tested this before with regular IP phones and it worked
fine.  
I copied an existing, working Hunt Pilot and assigned
members to the group as usual.
The new one rings fast busy.  I can’t figure out
what I am missing, or if something is broken.  
Any help is appreciated.
Micah
Bennett


[The entire original message is not included]
 
 
 
 
 

________________________________


 
 
 
 
 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip