[cisco-voip] Hunt Pilot fast busy

Wed Apr 29 09:22:06 EDT 2009

Thanks Wes.  I reset everything I could and it seems to be working now.
I tested with IP phones first and they worked.  I have now added the VG
ports and at least Im ringing.  I don't have anything on the other end
to answer yet, but I am going to go use a test set to make sure it
rings.

Micah Bennett 
Telecommunications Admin 
Active Outdoors 
3055 Lebanon Rd, Ste 2301 
Nashville, TN  37214 
Extension: 2357 
Office: 615-263-4066 
Mobile: 615-207-0318 
Email: micah.bennett at als-xtn.com <mailto:micah.bennett at als-xtn.com>  
Website: www.als-xtn.com <http://www.als-xtn.com>  

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Wednesday, April 29, 2009 8:06 AM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

Do I need to have any RouteList configuations related to this Hunt
Pilot.

Yesterday and this morning I got the RTMT message that the
RouteListExhausted when I tried to dial the pilot number.

Micah Bennett 

  _____  

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 6:51 PM
To: Micah Bennett
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

AFter you build out out this config you definitely ahve to reset the
pilot point, hunt list and line group.  anywhere there is a reset click
it.

On Tuesday, April 28, 2009 6:10:56 PM, Micah Bennett
<mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>  wrote:

Ok.  I built my Line group just like my Unity ports and assigned my
group of VG ports

I built the Hunt list just like my Unity HL.

I built the Hunt Pilot just like my Unity HP.

Still fast busy on the Hunt Pilot.

I went back and deleted the VG ports and added an IP phone for test and
the HP still gets fast busy. 

Am I missing something?

Micah Bennett 
Telecommunications Admin 
Active Outdoors 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Micah Bennett
Sent: Tuesday, April 28, 2009 4:50 PM
To: Wes Sisk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

Thanks.

I took a breath and looked back at everything.  I got it working with IP
phone extensions, but it still goes fast busy with Analog VG ports.

I am going to go the Hunt List route like the Unity ports and see how
that works. Thanks.

Micah Bennett 
Telecommunications Admin 
Active Outdoors 

  _____  

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 4:47 PM
To: Micah Bennett
Cc: Bill Talley; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

with AC config corrected then restart the AC service. since these are
analog ports there may be interesting issues with monitoring line state
via CTI.

your best bet is to go with the more native hunt pilot/hunt
list/linegroup configuration.  this is all built into ccm.exe natively
and does not depend on any CTI integration.

/wes

On Tuesday, April 28, 2009 4:38:32 PM, Micah Bennett
<mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>  wrote:

I found that finally, and it did not seem to help.  When I associated
it, it went from a fast busy to acting like it was stuck.  Don't
remember the details.  

I may try the hunt list setup like I have for my Unity and see how that
works.  

I just need a single incoming number to roll to 8 analog lines on my
VG224 that will be connected to a server for some download tasks.  It
worked a while back in my test but not now.

Thanks.

Micah Bennett 
Telecommunications Admin 
Active Outdoors 

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: Tuesday, April 28, 2009 3:01 PM
To: Micah Bennett
Cc: Bill Talley; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Hunt Pilot fast busy

AC?  did you associate to the AC user?  Is the AC user CTI enabled?  Do
you have other functional AC Pilot Points?

/Wes

On Tuesday, April 28, 2009 3:24:55 PM, Micah Bennett
<mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>  wrote:

Check that.  All is good.

Micah Bennett 

From: Bill Talley [mailto:btalley at gmail.com] 
Sent: Tuesday, April 28, 2009 2:19 PM
To: Micah Bennett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Hunt Pilot fast busy

I ran into this before and 'logged into hunt group' was unchecked on the
vg ports. After checking it, calls work as expecte

  _____  

From: Micah Bennett <mbennett at als-xtn.com> <mailto:mbennett at als-xtn.com>

Sent: Tuesday, April 28, 2009 1:45 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Hunt Pilot fast busy

Hello

I am trying to create a simple hunt group to some ports on my vg224.

I tested this before with regular IP phones and it worked fine.  

I copied an existing, working Hunt Pilot and assigned members to the
group as usual.

The new one rings fast busy.  I can't figure out what I am missing, or
if something is broken.  

Any help is appreciated.

Micah Bennett

[The entire original message is not included]

  _____  

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090429/6fc6820a/attachment.html>