[cisco-voip] Unity 4.x Upgrade to 5

[Scott Voll]

So long as you have the 12gig C partition.  if you have the 8gig....... it's
a backup.  reload Unity 4 with 12 gig partition then restore then upgrade
;-(.  Found out the hard way.
Scott

On Fri, Jul 31, 2009 at 12:09 PM, Pat Hayes <pat-cv at wcyv.com> wrote:

> Unity 4.x -> 5.0 is just a regular in-place upgrade, check the upgrade
> guide. No need to run a DiRT restore or COBRAS.
>
> On Tue, Jul 28, 2009 at 7:27 AM, Samuel Womack<womacksamuel at gmail.com>
> wrote:
> > What is the way to go about this these days...Noticed wording on
> > ciscounitytools that DirT isn't the thing to use for this....COBRAS is
> the
> > official supported way to do this?
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090803/5c47e5c8/attachment.html>