[cisco-voip] USB to RS-232 for router console port

[Jason Aarons (US)]

Have you ever found a good USB to RS-232 adapter that doesn't lock up in
HyperTerminal/Putty or change Com ports without telling you, etc?

 

My buddies  were talking about the headaches those USB to RS-232
adapters give. They usually program electrical PLCs (programmable logic
controls from Allen Bradley) which still have serial interface.

 

Found any good USB to RS-232 solutions? I found USB  driver problems are
even worse with x64 than x86.

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090806/ea3bca70/attachment.html>