[cisco-voip] Unity Connection Partitions and SS

[Pat Hayes]

For a true multi-tenant install like this, you need to route by port
or phonesystem. For example, create a separate phone system (and
associated ports) for each site, point your pilots to line groups
containing just those ports, and setup forwarding routing rules with
the appropriate SS for each site.

On Fri, Aug 7, 2009 at 10:12 AM, Lewis, Chris<Chris.Lewis at magnetar.com> wrote:
> It shows the dialled number rather than the pilot number.
>
> Tac are stumped btw. :-)
>
> ________________________________
> From: Lelio Fulgenzi
> To: Lewis, Chris
> Cc: cisco-voip at puck.nether.net
> Sent: Fri Aug 07 09:02:03 2009
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
> What does the remote port status monitor say? It should tell you the dialed
> pilot number. I haven't tried it my self (the forwarding rule config) but it
> seems like that would be the way.
>
> It might be TAC time.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Chris Lewis" <Chris.Lewis at magnetar.com>
> To: lelio at uoguelph.ca
> Cc: cisco-voip at puck.nether.net
> Sent: Friday, August 7, 2009 9:56:01 AM GMT -05:00 US/Canada Eastern
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
>
> Tried it.
>
> That works for direct routing - ie sign in - but for forward routing it
> doesn't work.
>
> ________________________________
> From: Lelio Fulgenzi
> To: Lewis, Chris
> Cc: cisco-voip at puck.nether.net
> Sent: Fri Aug 07 08:49:14 2009
> Subject: Re: [cisco-voip] Unity Connection Partitions and SS
>
> your forward routing rules allow you to set a calling search space based on
> the pilot you have forwarded to. it's the dialed number. not the best
> terminology, it should say "forwarded target" or something like that.
>
> try that out if you haven't already, or let us know if you have.
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
>
> ----- Original Message -----
> From: "Chris Lewis" <Chris.Lewis at magnetar.com>
> To: cisco-voip at puck.nether.net
> Sent: Friday, August 7, 2009 3:11:53 AM GMT -05:00 US/Canada Eastern
> Subject: [cisco-voip] Unity Connection Partitions and SS
>
> Has anyone set up UC utilising Partitions and SS?
>
>
>
> I am trying to do the following:
>
>
>
> 4 separate sites with overlapping DNs.
>
>
>
> I have setup UC with separate Partitions and SS.  Added DNs to their
> respective Partitions.  Set up Direct Routing Rules to allow the DN to dial
> UC – I have separate Pilot Numbers as per Cisco docs.
>
>
>
> The issue is when you try to dial the DN and have it forwarded to vmail.
> These use forward routing rules and due to the CallerID not being recognised
> as Vmail ID (IE Pilot number) they fail.
>
>
>
> Has anyone successfully managed to get this sort of scenario working?
>
>
>
> Thanks
>
>
>
> Chris
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> _______________________________________________ cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> The information contained in this message and its attachments
> is intended only for the private and confidential use of the
> intended recipient(s).  If you are not the intended recipient
> (or have received this e-mail in error) please notify the
> sender immediately and destroy this e-mail. Any unauthorized
> copying, disclosure or distribution of the material in this e-
> mail is strictly prohibited.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>