[cisco-voip] Problem with E&M

[Singh, Jitender]

Aman,

 

As per your experience what could be the issue whether it's related with
hardware or configuration issue.

 

 

Thanks & Regards

 

Jitender Singh

ALGORT Technologies Pvt. Ltd.

Ph: +91-9899107563

E-Mail : jitender.singh at algort.com

 

From: Aman Chugh [mailto:aman.chugh at gmail.com] 
Sent: Tuesday, August 11, 2009 10:06 PM
To: jitender.singh at algort.com
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Problem with E&M

 

Try making the call and enable debug vpm signal to see all differrent port
states and digits being dialed. Also in order to check whether this is a
dial peer issue do a debug ccapi voice inout.

Please be aware that these debugs would generate a lot of output and so
please try them when you do not have much calls on the router.

HTH
Aman

On Tue, Aug 11, 2009 at 11:17 AM, Singh, Jitender
<jitender.singh at algort.com> wrote:

Hi,

 

I am having cisco 1700 series router  with E&M card I am having issue that I
am not able to make or receive call from that card .

When we check sh voice call it shows like this :

 

Delhi20#sh voice call

 

0/0 -         -  -                     vpm level 0 state = S_OPEN_PEND

 

0/1 -         -  -                     vpm level 0 state = S_OPEN_PEND

 

2/0 -         -  -                     vpm level 0 state = S_OPEN_PEND

 

2/1 -         -  -                     vpm level 0 state = S_OPEN_PEND

 

But on other router when we check same it shows EN_OnHOOK can you pls. help
me with this problem .

 

 

 

Thanks & Regards

 

Jitender Singh

ALGORT Technologies Pvt. Ltd.

Ph: +91-9899107563

E-Mail : jitender.singh at algort.com

 


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090811/381ad8ce/attachment.html>