[cisco-voip] Problem with E&M

[Aman Chugh]

Try making the call and enable debug vpm signal to see all differrent port
states and digits being dialed. Also in order to check whether this is a
dial peer issue do a debug ccapi voice inout.

Please be aware that these debugs would generate a lot of output and so
please try them when you do not have much calls on the router.

HTH
Aman

On Tue, Aug 11, 2009 at 11:17 AM, Singh, Jitender <jitender.singh at algort.com
> wrote:

>  Hi,
>
>
>
> I am having cisco 1700 series router  with E&M card I am having issue that
> I am not able to make or receive call from that card .
>
> When we check sh voice call it shows like this :
>
>
>
> Delhi20#sh voice call
>
>
>
> 0/0 -         -  -                     vpm level 0 state = S_OPEN_PEND
>
>
>
> 0/1 -         -  -                     vpm level 0 state = S_OPEN_PEND
>
>
>
> 2/0 -         -  -                     vpm level 0 state = S_OPEN_PEND
>
>
>
> 2/1 -         -  -                     vpm level 0 state = S_OPEN_PEND
>
>
>
> But on other router when we check same it shows EN_OnHOOK can you pls. help
> me with this problem .
>
>
>
>
>
> * *
>
> *Thanks & Regards*
>
>
>
> *Jitender Singh*
>
> *ALGORT** **Technologies Pvt. Ltd.*
>
> *Ph: +91-9899107563*
>
> *E-Mail : **jitender.singh at algort.com*
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090811/f08ae2f8/attachment.html>