[cisco-voip] Outgoing Caller ID, My Router, Telco's PRI

Fuermann, Jason JBF005 at shsu.edu
Tue Aug 11 17:35:22 EDT 2009


We were ok sending them "unknown", but 911 didn't work. We have to override with national ISDN

From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: Tuesday, August 11, 2009 3:16 PM
To: Fuermann, Jason
Cc: 'Jeff Ruttman'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Outgoing Caller ID, My Router, Telco's PRI

only other CPE variable is the calling party number plan and type.  you may try overriding those.

On Tuesday, August 11, 2009 10:53:41 AM , Fuermann, Jason <JBF005 at shsu.edu><mailto:JBF005 at shsu.edu> wrote:

Definitely an ATT problem if you see it in q391. I know ATT charges us extra to let us present our DID's. On a side note, good luck getting ATT to believe you. We deal with them all the time and it's constantly "you need to check the programming on your side" as if we hadn't already done that and told them.

From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Ruttman
Sent: Tuesday, August 11, 2009 9:45 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Outgoing Caller ID, My Router, Telco's PRI

Greetings,

If, when doing a "debug isdn q391" on my voice router, I see the Calling Party presenting 10 digits to the PRI, then what else on my side of the Caller ID equation might I alter to have those 10 digits show up on the Called Party's phone?

As it stands now, the Called Party sees the number assigned to the PRI itself and not the external mask configured on the phone, not the 10 digits I see being presented to the PRI via the debug.

Other points of interest:

We have 2 other PRIs from AT&T, and I see the same 10 digits presented to those 2 other PRIs, and those numbers DO show up on the Called Party's phone.

When I send a call out through the problem PRI and call an AT&T cell phone, I DO SEE the proper caller id on the Called Party phone, but I do NOT when I call, say a Sprint phone or a Verizon phone.

AT&T's response to my questions on the problem PRI:
We would pass the T16OX number for caller id. It is up to the customer to program their equipment with the DID number they want to display. I would have him check with his vendor on his programming. I don't know what else to suggest to him.
So anything I can try?  Push back on AT&T?
Thanks, jeff

CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.






________________________________






_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090811/960d0f8f/attachment.html>


More information about the cisco-voip mailing list