[cisco-voip] Migrating from CM 4.1.3 to Cisco BE 7.0

[Lelio Fulgenzi]

well, this doesn't sound promising. what kind of garbage exists in 4.x databases? 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Wes Sisk" <wsisk at cisco.com> 
To: "Mike O" <mikeeo at msn.com> 
Cc: cisco-voip at puck.nether.net 
Sent: Wednesday, August 12, 2009 8:49:47 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Migrating from CM 4.1.3 to Cisco BE 7.0 

imho. run DMA. it it works for you then that is the shortest path. 
if DMA reports errors that you cannot easily repair then stare and compare. 

dma has improved significantly and even better with 7.1. however, there is so much garbage possible in 4.x databases that the migration tool simply cannot always be accurate. 
/wes 

On Tuesday, August 11, 2009 9:12:39 PM , Mike O <mikeeo at msn.com> wrote: 



I have to migrate about 50 users/phone, whats the best way? DMA or start from scratch? 
_______________________________________________
cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090812/0dfdc23c/attachment.html>