[cisco-voip] BLF/SD button - Alerts, but won't pickup.

[Bob Fronk]

I just added the BLF/SD to the 7914 button, and (after fixing the pickup group problem I had) they work fine.

--
Bob




From: o.a.skom at gmail.com [mailto:o.a.skom at gmail.com] On Behalf Of Oleg Skomorokhov
Sent: Wednesday, August 12, 2009 2:18 PM
To: Bob Fronk
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] BLF/SD button - Alerts, but won't pickup.

I thought BLF/SD is not supported on 7914 buttons?.. IF not, please - how to configure it? I'm able to add just an ordinary speed dials to a 7914-enabled phone.
On Mon, Aug 10, 2009 at 8:52 PM, Bob Fronk <bob at btrfronk.com<mailto:bob at btrfronk.com>> wrote:

I have a phone setup with a 7914 Expansion module.  On it are several BLF/SD buttons.  The BLF/SD shows when the other DN is ringing/receiving a cal or is on a call, and it will function as a speed dial.  However, when there is an incoming call and we want to answer via the BLF/SD button, it will not pickup (busy signal when pressed).



In the BLF button configuration, the “Pickup” check box is checked.  Each phone is in the same Subscribe CSS.



I am sure I am just missing a small setting someplace, but cannot find it.



Thanks for any shoves in the right direction.







_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



--
Скоморохов Олег Александрович
Специалист ОТП
ЗАО "ТВЭЛ-ИНВЕСТ"
тел.(495)363-35-07 доб.1915
email:oskomorokhov at tvelinvest.ru<mailto:email%3Aoskomorokhov at tvelinvest.ru>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090812/367d1824/attachment.html>