[cisco-voip] BLF/SD button - Alerts, but won't pickup.

[Oleg Skomorokhov]

I thought BLF/SD is not supported on 7914 buttons?.. IF not, please - how to
configure it? I'm able to add just an ordinary speed dials to a 7914-enabled
phone.

On Mon, Aug 10, 2009 at 8:52 PM, Bob Fronk <bob at btrfronk.com> wrote:

>  I have a phone setup with a 7914 Expansion module.  On it are several
> BLF/SD buttons.  The BLF/SD shows when the other DN is ringing/receiving a
> cal or is on a call, and it will function as a speed dial.  However, when
> there is an incoming call and we want to answer via the BLF/SD button, it
> will not pickup (busy signal when pressed).
>
>
>
> In the BLF button configuration, the “Pickup” check box is checked.  Each
> phone is in the same Subscribe CSS.
>
>
>
> I am sure I am just missing a small setting someplace, but cannot find it.
>
>
>
> Thanks for any shoves in the right direction.
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Скоморохов Олег Александрович
Специалист ОТП
ЗАО "ТВЭЛ-ИНВЕСТ"
тел.(495)363-35-07 доб.1915
email:oskomorokhov at tvelinvest.ru <email%3Aoskomorokhov at tvelinvest.ru>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090812/d678730d/attachment.html>