[cisco-voip] Testing phone firmware updates prior to rollout.

Jeff Ruttman ruttmanj at carewisc.org
Thu Aug 13 09:47:56 EDT 2009


Now, I'm not the guy to gainsay TAC or hardly anyone on these subjects,
but restarting the tftp service, I believe, only makes the new files
available to the tftp service.  I don't think a tftp restart entails a
system wide comparison of phone loads and sends new ones to phones which
have old ones.  It's more the phone as it boots up compares its load
with the pub and if different from the Default Load, upgrades itself via
tftp.  Also I'm on ver 6.1, not 7.  But hopefully someone else will
chime in who really knows.

I'm pretty sure I did do a tftp restart after the new load install and
before editing the Device Defaults.

Thanks
jeff 

-----Original Message-----
From: Robben, John [mailto:JRobben at naic.org] 
Sent: Thursday, August 13, 2009 7:43 AM
To: Jeff Ruttman
Subject: RE: [cisco-voip] Testing phone firmware updates prior to
rollout.

Jeff,

What TAC is telling me is that I have to bounce the tftp server on the
Publisher.  Do you remember having to do that step as well? 

-----Original Message-----
From: Jeff Ruttman [mailto:ruttmanj at carewisc.org]
Sent: Thursday, August 13, 2009 7:42
To: Robben, John; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Testing phone firmware updates prior to
rollout.

I've not run ver 7, but in version 6.1 anyway I did this:

In the Device Defaults page, I noted the Load Information for the phone
model I wanted to try with a new phone load.

Installed the new phone load.

Back on the Device Defaults page, the Load Information field for the
phone in question was changed to reflect the new load.  I edited the
field to put it back to the original phone load but also noted what the
new phone load name was.

Finally, on the phone(s) I wanted to test the new phone load, in the
device config there is a field in which you can specify the load you
want to use for that particular phone.  In there I entered the new phone
load name and then restarted the phone.

That worked for me in ver 6.1; maybe it will work similarly in ver 7?

Thanks
jeff

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robben, John
Sent: Wednesday, August 12, 2009 1:46 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Testing phone firmware updates prior to rollout.

Can anyone share a method for testing phone firmware on a limited set of
phones?

I've installed a TAC recommended firmware update in CUCM 7.0 per the
readme, but now TAC tells me that once I restart the TFTP service, all
phones in the organization will begin downloading the updated firmware.

Thanks in advance.
-----------------------------------------
CONFIDENTIALITY NOTICE

This message and any attachments are from the NAIC and are intended only
for the addressee. Information contained herein is confidential, and may
be privileged or exempt from disclosure pursuant to applicable federal
or state law.  This message is not intended as a waiver of the
confidential, privileged or exempted status of the information
transmitted.  Unauthorized forwarding, printing, copying, distribution
or use of such information is strictly prohibited and may be unlawful.
If you are not the addressee, please promptly delete this message and
notify the sender of the delivery error by e-mail or by calling the NAIC
Help
Desk at (816)783-8500.   
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
CONFIDENTIALITY NOTICE: The information contained in this email
including attachments is intended for the specific delivery to and use
by the individual(s) to whom it is addressed, and includes information
which should be considered as private and confidential. Any review,
retransmission, dissemination, or taking of any action in reliance upon
this information by anyone other than the intended recipient is
prohibited. If you have received this message in error, please reply to
the sender immediately and delete the original message and any copy of
it from your computer system. Thank you.
-----------------------------------------
CONFIDENTIALITY NOTICE

This message and any attachments are from the NAIC and are intended only
for the addressee. Information contained herein is confidential, and may
be privileged or exempt from disclosure pursuant to applicable federal
or state law.  This message is not intended as a waiver of the
confidential, privileged or exempted status of the information
transmitted.  Unauthorized forwarding, printing, copying, distribution
or use of such information is strictly prohibited and may be unlawful.
If you are not the addressee, please promptly delete this message and
notify the sender of the delivery error by e-mail or by calling the NAIC
Help
Desk at (816)783-8500.   
CONFIDENTIALITY NOTICE: The information contained in this email including attachments is intended for the specific delivery to and use by the individual(s) to whom it is addressed, and includes information which should be considered as private and confidential. Any review, retransmission, dissemination, or taking of any action in reliance upon this information by anyone other than the intended recipient is prohibited. If you have received this message in error, please reply to the sender immediately and delete the original message and any copy of it from your computer system. Thank you.


More information about the cisco-voip mailing list