[cisco-voip] T37 fax problem

[Anthony Kouloglou]

Hi,
also check this:
I had similar problems and the problem was resolved when i issued the 
command:
/network-clock-select <priority> <interface>/

There were many slipped seconds before i issued this command.

Regards
Anthony

Oleg Skomorokhov wrote:
> Try to set the fax rate to 9600 on the dial-peers, cisco says that 
> some problems can occur when receiving faxes on 14000 and higher 
> speeds using FXS, ATA, or VGWs.
>
> On Thu, Aug 13, 2009 at 10:41 AM, Mustafa Yadav 
> <mustafa.yadav at gmail.com <mailto:mustafa.yadav at gmail.com>> wrote:
>
>     Hi,
>
>     We are running T37 fax in several branches.But 3 of them are getting
>     most of the fax pages corrupted.I checked the config with the others
>     Everthing seems correct.IOS is
>     flash:c2800nm-advipservicesk9-mz.124-15.T9.bin and dsp is 9.4.910.
>
>     So the fax pages succesfully taken and I can see tiff files in the
>     mail server but mostly big chareccters and half Β blank page.
>     What could be the reason?
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
>
> -- 
> Π‘ΠΊΠΎΠΌΠΎΡ�ΠΎΡ�ΠΎΠ² Π�Π»Π΅Π³ Π�Π»Π΅ΠΊΡ�Π°Π½Π΄Ρ�ΠΎΠ²ΠΈΡ�
> Π‘ΠΏΠ΅Ρ�ΠΈΠ°Π»ΠΈΡ�Ρ� Π�Π’Π�
> Π�Π�Π� "Π’Π�Π­Π�-Π�Π�Π�Π�Π‘Π’"
> Ρ�Π΅Π».(495)363-35-07 Π΄ΠΎΠ±.1915
> email:oskomorokhov at tvelinvest.ru 
> <mailto:email%3Aoskomorokhov at tvelinvest.ru>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>