[cisco-voip] Suppressing CLID Number Display for Private Lines

[Tkachuk,Birni]

We have our voice gateway's Calling Party Transformation programmed to "Use Calling Party's External Phone Number Mask" and then in the calling party mask we have programmed the 10 digit area code; nxx; and 4 XXXX's.  Works like a charm but now we want to be able to mask numbers programmed for Priviate Lines on specific sets so that all that shows is PRIVATE and no number display.  Because our PRI are programmed with a default number display which is the number of our Security Department, that is the number that displays  if we do not fill out the "External Phone Number Mask" on the DN Config.

Is there a way around this?

Birni Tkachuk
Voice Services Specialist - Services Bureau
Department of Information Services
P  780.471.7532  F  780.491.3083


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090818/346bfdb3/attachment.html>