[cisco-voip] peer firmware sharing via AXL

Mordechai m.rabinovich at nves.ca
Thu Aug 20 09:33:50 EDT 2009


I found the field in the device table - vendorConfig. I was looking for xml
as per version 6 dictionary but I guess 5.1 is different in this respect. I
can manipulate the entries via Perl so this is great.

Ryan, Dennis, thanks for setting me in the right direction.

Mordechai

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: August-20-09 9:17 AM
To: Mordechai
Cc: 'Dennis Heim'; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] peer firmware sharing via AXL

It's in the device table.  Unfortunately all of the product specific  
configuration is stored in the same column, in an xml blob (as Dennis  
pointed out) so it won't be as simple as simply updating a value for  
each phone.

-Ryan

On Aug 20, 2009, at 8:18 AM, Mordechai wrote:

But in which table? I searched through the data dictionary for a  
couple of hours and couldn't figure this out. Appreciate your help.

From: Dennis Heim [mailto:Dennis.Heim at cdw.com]
Sent: August-20-09 4:30 AM
To: Mordechai; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] peer firmware sharing via AXL

There is a field in the database that contains the product specific  
information in xml format if memory serves correct.

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com
www.berbee.com

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net 
] On Behalf Of Mordechai
Sent: Thursday, August 20, 2009 12:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] peer firmware sharing via AXL

Hello,

Anybody knows the table that holds Product Specific Configuration  
Layout features for a phone in 5.1 database? Specifically, I need to  
set PFS on a bunch of phones. BAT will not do this properly. There is  
an exe script from Cisco but there is a lot of confusion if it will  
work with 5.1

In any case knowing where it is in the DB can be very handy (there are  
other features that might be useful to control e.g. PC port etc).

Thanks,

Mordechai
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip






More information about the cisco-voip mailing list