[cisco-voip] HP switches for VoIP (specifically QoS and multicast routing)

[Dana Tong (AU)]

Hi guys,



Has anyone had any experience using HP switching infrastructure? Specifically how to configure QoS to trust Cisco phones marking DSCP and COS values.



Can they also be configured to support multicast routing? And if so, can they be configured to join a RP-address on a Cisco voice gateway?



I've also heard that some HP switches do not support Cisco proprietary CDP and you have to manually assign each phones voice vlan? Is there a way of automating this process or is it a hand-on approach to each phone?



Configuration guides and templates would be great thanks.



Thanks all in advance.



Cheers

Dana

******************************************************************************
 - NOTICE FROM DIMENSION DATA AUSTRALIA
This message is confidential, and may contain proprietary or legally privileged information.  If you have received this email in error, please notify the sender and delete it immediately.

Internet communications are not secure. You should scan this message and any attachments for viruses.  Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.
******************************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20090831/4077347b/attachment.html>