[cisco-voip] CUCM 7.1(2a): Bulk Import of CTI Route-Points

[Pat Hayes]

Are you trying to import CTI Route Points or CTI Ports? On my 7.1(2)
server, I only see bulk import options for CTI Ports.

Clicking on a CTI Route Point, I see the default max calls/busy
trigger is 5000/4500, and the page indicates that the absolute max is
10000. For a CTI Port, however, the default is 4/2 and the max is 200.

It sounds like, perhaps, you are trying to import CTI Ports, which max
out at 200. Just a thought.

On Mon, Aug 31, 2009 at 6:25 AM, rschuknecht<rschuknecht at gmx.de> wrote:
> Hi,
>
> no one faced this before?
>
> /Robert
>
> -----Ursprüngliche Nachricht-----
> Von: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] Im Auftrag von rschuknecht
> Gesendet: Freitag, 28. August 2009 11:18
> An: cisco-voip at puck.nether.net
> Betreff: [cisco-voip] CUCM 7.1(2a): Bulk Import of CTI Route-Points
>
> Hi,
>
> i am trying to do an Bulk Import of approx. 200 CTI-Route Points. The
> Route-Points get configured but with the wrong Max. Calls and Busy Trigger
> Values. In my *.csv Files these values are 5000 and 4500, but the imported
> Route-Points are only showing Max. Calls 2 and Busy Trigger 1. How do I get
> around this? I do not want to configure the Max. Calls and Busy Trigger by
> hand.
>
> Any help/hint is welcome!
>
> Thanks
>
> /Robert
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>