[cisco-voip] Cisco VG20x voice gateway interoperability (CM required?)

[Dale Shaw]

Thanks Nate. I figured that was the case, but the data sheet doesn't
spell that out at all. I thought there might have been some
proprietary voodoo going on, perhaps around licensing.

cheers,
Dale

On Fri, Dec 4, 2009 at 2:33 PM, Nate VanMaren <VanMarenNP at ldschurch.org> wrote:
> There full IOS, so SIP/H.323/MGCP/SCCP.  No CM required.
>
> ________________________________________
> From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Dale Shaw [dale.shaw+cisco-voip at gmail.com]
> Sent: Thursday, December 03, 2009 7:58 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Cisco VG20x voice gateway interoperability (CM    required?)
>
> Hi all,
>
> Probably a bit of a newbie question but I'm hoping for a quick response --
>
> Do the Cisco VG200 series (202, 204, 224) devices _require_
> CallManager in some form, or can they be used as generic ATAs with a
> 3rd party SIP gateway?
>
> cheers,
> Dale