[cisco-voip] RAID1 disk mirroring

[cips]

For Cisco MCS server this procedure is officially not supported.

 

1.       The system will boot from the primary disk

2.       In the new server the system will boot but you might have issues
with (raid) drivers in the os

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ifilxh
Sent: vrijdag 4 december 2009 12:55
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] RAID1 disk mirroring

 

Our normal disk swap procedure is
1. power off the server
2. pull disk 1 out
3. if upgrade fails, power off the server again, pull out disk 0, and put
disk 1 back to the original tray, power on the server and then put disk 0
back to tray0

Curious to know
1. what is going to happen if I pull out both disks and swap the disks,
disk1 goes to the slot0, disk0 goes to slot1
1. what is going to happen if I pull out both disks and insert them to
another server

Thanks in advance.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091204/da3d1f1a/attachment.html>