[cisco-voip] RAID1 disk mirroring

[ifilxh]

Our normal disk swap procedure is
1. power off the server
2. pull disk 1 out
3. if upgrade fails, power off the server again, pull out disk 0, and put
disk 1 back to the original tray, power on the server and then put disk 0
back to tray0

Curious to know
1. what is going to happen if I pull out both disks and swap the disks,
disk1 goes to the slot0, disk0 goes to slot1
1. what is going to happen if I pull out both disks and insert them to
another server

Thanks in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091204/76e9b9e5/attachment.html>