[cisco-voip] Click to dial

[Hussam Ahmad]

This will never work without association of user with the phones, so to make
1500 you can use BAT there an option to add the users with the phones but
you have to delete the 1500 phones and add them again using this option in
order to achieve Click to Dial.

 


Thanks and best regards,

 

HUSSAM AHMAD

 

	

 

From: Louis Koekemoer (ZA) [mailto:Louis.Koekemoer at za.didata.com] 
Sent: Tuesday, December 01, 2009 6:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Click to dial

 

I'm trying to deploy the Click to Dial application from Cisco, but we have a
bit of a challenge. We get it working, but only once we associate a physical
device to an end user, which obviously will be a pain implementing 1500
phones, and for future support. Please could someone assist?

 

 

Regards

 

Louis Koekemoer

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091206/5e4b040d/attachment.html>