[cisco-voip] Click to dial

[Steve G]

That will not work without a phone associated to a user ID.  Try using bat
to associate all of your phones to users.

On Tue, Dec 1, 2009 at 7:46 AM, Louis Koekemoer (ZA) <
Louis.Koekemoer at za.didata.com> wrote:

>  I’m trying to deploy the Click to Dial application from Cisco, but we
> have a bit of a challenge. We get it working, but only once we associate a
> physical device to an end user, which obviously will be a pain implementing
> 1500 phones, and for future support. Please could someone assist?
>
>
>
>
>
> Regards
>
>
>
> *Louis Koekemoer*
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091201/fcdd4c3d/attachment.html>