[cisco-voip] which NIC to license, i'm guessing 1 (or 0 if 0 is present)

[Ryan Ratliff]

It should be the first NIC that gets used.  If in doubt during CUCM install it pops up a message and gives you the mac.  You can also get it via 'show network eth0' and Show->Network in the OS Admin web page.

-Ryan

On Dec 8, 2009, at 2:57 PM, Lelio Fulgenzi wrote:

Just looking at my new HP G6 servers, they have four NICs, 1 thru 4.

CUCM v7 is looking at using the first NIC, NIC1, correct?

---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091208/75023971/attachment.html>