[cisco-voip] which NIC to license, i'm guessing 1 (or 0 if 0 is present)

[lelio at uoguelph.ca]

Thanks. I was hoping not to have to go through the install, but it  
probably wouldn't hurt to be sure. The popup always seems to stay up  
just long enough for me to jot down 11 out of the 12 characters and  
then disappear.  :)

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On 2009-12-08, at 4:29 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> It should be the first NIC that gets used.  If in doubt during CUCM  
> install it pops up a message and gives you the mac.  You can also  
> get it via 'show network eth0' and Show->Network in the OS Admin web  
> page.
>
> -Ryan
>
> On Dec 8, 2009, at 2:57 PM, Lelio Fulgenzi wrote:
>
> Just looking at my new HP G6 servers, they have four NICs, 1 thru 4.
>
> CUCM v7 is looking at using the first NIC, NIC1, correct?
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Bad grammar makes me [sic]" - Tshirt
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091208/ba65e0ab/attachment.html>