[cisco-voip] Restore backup to CUCM 5.1.3

[Jonathan Charles]

I am really not sure what is happening here... it seems to start the
restore, then just fizzle out... I see it hit the SFTP server... move
some files... but the status doesn't change and hitting refresh does
nothing... it does the say the DRF Master Agent is busy if I try to do
anything else...


Jonathan

On Tue, Dec 8, 2009 at 3:46 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
> Is that just the BAT files?  CCM_CCMDB is where your actual database is.
>
> -Ryan
>
> On Dec 8, 2009, at 4:40 PM, Jonathan Charles wrote:
>
> OK, worse... I just ran another backup of the old server and I cannot
> open the ccm_bat.tar...
>
>
> Weird...
>
>
> Jonathan
>
> On Tue, Dec 8, 2009 at 3:33 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>> The hostname_ccm_bat.tar appears to be corrupt...
>>
>> Joy.
>>
>>
>> Jonathan
>>
>> On Tue, Dec 8, 2009 at 3:32 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>>> I did reboot post restore, there is no data....
>>>
>>> In the backup tarballs, there is a 24MB drf_ontape_backup.gz
>>>
>>> This thing has a 226MB file in it...
>>>
>>>
>>>
>>> Jonathan
>>>
>>> On Tue, Dec 8, 2009 at 3:22 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
>>>> Assuming you rebooted post-restore if you look at the csv files in the backup tarball is there data there?
>>>>
>>>> -Ryan
>>>>
>>>> On Dec 8, 2009, at 3:16 PM, Jonathan Charles wrote:
>>>>
>>>> OK, I am trying to restore a backup to a server... and I get the following:
>>>>
>>>> ERROR: , Restore Completed...
>>>>
>>>> And no data gets imported...
>>>>
>>>>
>>>> Any ideas?
>>>>
>>>> It is CUCM 5.1.3
>>>>
>>>>
>>>>
>>>> Jonathan
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>>
>>
>
>