[cisco-voip] Dial Via Office CUMA

[Dane Newman]

I have rebooted the servers and it still acts this way anyone have any
advice?
Dane

On Wed, Dec 9, 2009 at 3:01 AM, Dane Newman <dane.newman at gmail.com> wrote:

> Hello Folks
>
> I am trying to setup dial via office on my cisco unified mobile advantage.
> I have everything else setup and working but dial via office when you go to
> connection status on my iphone cisco mobile client says "error" eventually
> it gets stuck in an initializing then updating loop before awhile.  The rest
> are online.  I followed the guide published on ciscos webpage for setting up
> cuma with cucm.   I configured the cucm as per the screenshots.  I have a
> 2821 router as my gateway with the dial peer for incoming as shown below.
>
> any assistance would be really helpful thanks again!
>
>
> dial-peer voice 10001 voip
>  description incoming Calldid
>  translation-profile incoming incomingdid
>  preference 1
>  incoming called-number 678456329.
>  dtmf-relay rtp-nte
>  codec g711ulaw
>  no vad
>
> Cisco2821#test voice trans 3 6784563298
> Matched with rule 3
> Original number: 6784563298     Translated number: 108
> Original number type: none      Translated number type: none
> Original number plan: none      Translated number plan: none
> Cisco2821#
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091209/435560bf/attachment.html>